Panasonic KX-FP181 Page 82 Operating Instructions Manual Download

Page: 82 / 94

Jams

Recording paper jam

Open the front cover by pulling up the centre
part.

If the unit does not eject any recording paper during fax reception or copying, the recording
paper has jammed and the display will show the following message.

Display:

Remove the jammed paper as follows.

PAPER JAMMED

Centre part

Front
cover

Push the back cover open button (

) and

open the back cover (

Back cover

open button

Remove the jammed recording paper.

recording
paper

Jammed

If the ink film is slack, tighten it by winding
the gear.

Close the back cover securely by pushing
down on the dotted area at both ends (

Close the front cover securely (

Gear

Dotted area

Ink film

Incorrect

Correct

Tight

Summary of Contents for KX-FP181































































































Search results

Summary of Contents for KX-FP181

Reviews:

Related manuals for KX-FP181

Brands by name

Popular brands

Panasonic KX-FP181, Operating Instructions Manual

Search results

Summary of Contents for KX-FP181

Reviews:

Related manuals for KX-FP181

Brands by name

Popular brands