Panasonic KX-FP181 Operating Instructions Manual Download

Page: 76 / 94

Error Messages

Display message

UNIT OVERHEATED

TRANSMIT ERROR

REMOVE DOCUMENT

REDIAL TIME OUT

POLLING ERROR

PLEASE WAIT

PAPER JAMMED

NO FAX REPLY

MODEM ERROR

MESSAGE FULL

MEMORY FULL

●

When making a copy, the document being stored exceeds the
memory capacity of the unit. Press

to clear the

message. Divide the document and try again.

●

There is no memory left to record a voice message. Erase
unnecessary messages (p. 57) (KX-FP185 only).

●

There is something wrong with the modem circuit. Contact our
service personnel.

●

The other party’s fax machine is busy or has run out of recording
paper. Try again.

●

A recording paper jam occurred. Clear the jammed paper (p. 80).

●

The unit is checking that there is no slack on the ink film. Wait for
a while.

●

The other party’s fax machine does not provide the polling
function. Check with the other party.

●

The other party’s fax machine is busy or has run out of recording
paper. Try again.

●

The document is jammed. Remove the jammed document (p. 81).

●

Attempted to transmit a document longer than 600 mm. Press

to remove the document. Divide the document into two

or more sheets and try again.

●

A transmission error occurred. Try again.

●

The unit is too hot. Let the unit cool down.

STOP

Cause & Remedy

Summary of Contents for KX-FP181































































































Search results

Summary of Contents for KX-FP181

Reviews:

Related manuals for KX-FP181

Brands by name

Popular brands

Panasonic KX-FP181, Operating Instructions Manual

Search results

Summary of Contents for KX-FP181

Reviews:

Related manuals for KX-FP181

Brands by name

Popular brands