Panasonic KX-FLM663HX, Operating Instructions Manual

Page: 19 / 92

2. Preparation
19
Document Requirements
2.4 Setting the original
1
Adjust the width of the document guides (
1
) to fit
the actual size of the document.
2
Insert the document (up to 20 pages) FACE DOWN
into the feeder until a single beep is heard and the
unit grasps the document.
Note:
L
Check that any ink, paste or correction fluid has dried
completely.
L
Remove clips, staples or other fasteners.
L
Do not insert the following types of documents:
(Make a copy of the document and set the copy
instead.)
–
Chemically treated paper such as carbon or
carbonless duplicating paper
– Electrostatically charged paper
– Badly curled, creased or torn paper
– Paper with a coated surface
– Paper with a faint image
– Paper with printing on the opposite side that can
be seen through the other side, such as
newsprint
L
To set a document with a width of less than 210 mm,
we recommend using a copy machine to copy the
original document onto A4 or letter-size paper, then
setting the copied document.
L
Do not set documents that do not satisfy the
requirements of size and weight. Make a copy of the
document using a copy machine and set the copy.
L
Available document size, document weight and
effective scanning area are as follows:
Minimum document size
Maximum document size
Effective scanning area
L
Shaded area will be scanned.
Document weight
L
Single sheet:
45 g/m
2
to 90 g/m
2
L
Multiple sheets:
60 g/m
2
to 80 g/m
2
1
128 mm
128 mm
600 mm
216 mm
216 mm
208 mm
4 mm 4 mm
4 mm
4 mm