Panasonic KX-FLM653EX Operating Instructions Manual Download Page 61

Page: 61 / 86

8. Help

“

OUT OF PAPER

”

Recording paper is not installed or the unit has run out of paper.
Install paper (page 16).

Recording paper is not fed into the unit properly. Re-install paper
(page 16).

“

PAPER JAMMED

”

A recording paper jam occurred. Clear the jammed paper (page
69).

“

PC FAIL OR BUSY

”

The cable or the computer power cord is not connected correctly.
Check the connections (page 41).

The software is not running on the computer. Restart the software
and try again.

“

PLEASE WAIT

”

The unit is warming up. Wait for a while.

“

POLLING ERROR

”

The other party’s fax machine does not offer the polling function.
Check with the other party.

“

REDIAL TIME OUT

”

The other party’s fax machine is busy or has run out of recording
paper. Try again.

“

REMOVE DOCUMENT

”

The document is jammed. Remove the jammed document (page
72).

Attempted to send a document longer than 600 mm. Press

{

STOP

}

to remove the document. Divide the document into two or

more sheets and try again.

“

REPLACE DRUM

”

“

CHANGE SUPPLIES

”

The drum life is complete. Replace the drum unit immediately
(page 66).

“

RX MEMORY FULL

”

The memory is full of received documents due to a lack of
recording paper or a recording paper jam. Install paper (page 16)
or clear the jammed paper (page 69).

“

TONER EMPTY

”

“

CHANGE SUPPLIES

”

The toner life is complete. Replace the toner cartridge immediately
(page 66).

“

TONER LOW

”

“

CHANGE SUPPLIES

”

The toner life is near to an end. Replace the toner cartridge as
soon as possible (page 66).

“

TRANSMIT ERROR

”

A transmission error occurred. Try again.

“

WARMING UP

”

The inside of the unit is cold. Let the unit warm up. Wait for a while.

“

WRONG PAPER

”

The fax message was printed on paper which is shorter than A4
size paper. Use the appropriate size paper (page 77).

Display

Cause & Solution

FLM653EX-PFQX2377ZA-en.book Page 59 Tuesday, December 20, 2005 8:55 AM

Summary of Contents for KX-FLM653EX























































































Search results

Summary of Contents for KX-FLM653EX

Reviews:

Related manuals for KX-FLM653EX

Brands by name

Popular brands

Panasonic KX-FLM653EX, Operating Instructions Manual

Search results

Summary of Contents for KX-FLM653EX

Reviews:

Related manuals for KX-FLM653EX

Brands by name

Popular brands