Panasonic KX-FLM653EX Operating Instructions Manual Download Page 59

Page: 59 / 86

8. Help

8 Help

8.1 Error messages – Reports

If a problem occurs during fax transmission or reception, one of the following messages will be printed on
the sending and journal reports (page 31).

Message

Code

Cause & Solution

COMMUNICATION ERROR

40-42
46-72

A transmission or reception error occurred.
Try again or check with the other party.

43
44

A line problem occurred. Connect the
telephone line cord to a different jack and try
again.

An overseas transmission error occurred. Try
using the overseas mode (feature #411, page
53).

DOCUMENT JAMMED

-----

The document is jammed. Remove the
jammed document (page 72).

ERROR-NOT YOUR UNIT

53
54
59
70

A transmission or reception error occurred
because of a problem with the other party’s
fax machine. Check with the other party.

JUNK FAX PROH. REJECT

-----

The junk fax prohibitor feature of this unit
rejected fax reception.

MEMORY FULL

-----

The memory is full of received documents
due to a lack of recording paper or a recording
paper jam. Install paper (page 16) or clear the
jammed paper (page 69).

NO DOCUMENT / FAILED PICKUP

-----

The document was not fed into the unit
properly. Re-insert it and try again.

OTHER FAX NOT RESPONDING

-----

The other party’s fax machine is busy or has
run out of recording paper. Try again.

The other party’s fax machine rings too many
times. Send the fax manually (page 30).

The other party’s machine is not a fax
machine. Check with the other party.

The number you dialled is not in service.

PRESSED THE STOP KEY

-----

L {

STOP

}

was pressed and fax communication

was cancelled.

THE COVER WAS OPENED

-----

The front cover was opened. Close it and try
again.

-----

Fax transmission or reception was
successful.

FLM653EX-PFQX2377ZA-en.book Page 57 Tuesday, December 20, 2005 8:55 AM

Summary of Contents for KX-FLM653EX























































































Search results

Summary of Contents for KX-FLM653EX

Reviews:

Related manuals for KX-FLM653EX

Brands by name

Popular brands

Panasonic KX-FLM653EX, Operating Instructions Manual

Search results

Summary of Contents for KX-FLM653EX

Reviews:

Related manuals for KX-FLM653EX

Brands by name

Popular brands