Panasonic KX-FLM651E Operating Instructions Manual Download Page 61

Page: 61 / 86

8. Help

8 Help

8.1 Error messages – Reports

If a problem occurs during fax transmission or reception, one of the following messages will be printed on
the sending and journal reports (page 33).

Message

Code

Cause & Solution

COMMUNICATION ERROR

40-42
46-72

A transmission or reception error occurred.
Try again or check with the other party.

43
44

A line problem occurred. Connect the
telephone line cord to a different socket and
try again.

An overseas transmission error occurred. Try
using the overseas mode (feature #411, page
55).

DOCUMENT JAMMED

-----

The document is jammed. Remove the
jammed document (page 74).

ERROR-NOT YOUR UNIT

54
59
70

A transmission or reception error occurred
because of a problem with the other party’s
fax machine. Check with the other party.

JUNK FAX PROH. REJECT

-----

The junk fax prohibitor feature of this unit
rejected fax reception.

MEMORY FULL

-----

The memory is full of received documents
due to a lack of recording paper or a recording
paper jam. Install paper (page 19) or clear the
jammed paper (page 71).

NO DOCUMENT / FAILED PICKUP

-----

The document was not fed into the unit
properly. Re-insert it and try again.

OTHER FAX NOT RESPONDING

-----

The other party’s fax machine is busy or has
run out of recording paper. Try again.

The other party’s fax machine rings too many
times. Send the fax manually (page 32).

The other party’s machine is not a fax
machine. Check with the other party.

The number you dialled is not in service.

PRESSED THE STOP KEY

-----

L {

STOP

}

was pressed and fax communication

was cancelled.

THE COVER WAS OPENED

-----

The front cover was opened. Close it and try
again.

-----

Fax transmission or reception was
successful.

FLM651E-PFQX2346ZB-en.book Page 59 Tuesday, November 22, 2005 3:26 PM

Summary of Contents for KX-FLM651E























































































Search results

Summary of Contents for KX-FLM651E

Reviews:

Brands by name

Popular brands

Panasonic KX-FLM651E, Operating Instructions Manual

Search results

Summary of Contents for KX-FLM651E

Reviews:

Brands by name

Popular brands