Panasonic KX-FLB753HK Operating Instructions Manual Download Page 68

Page: 68 / 90

Error Messages

- 68 -

Help

Reports

If your unit cannot send a fax, check the following:
–

The number you dialled is correct.

–

The other party’s machine is a facsimile.

If the problem remains, correct it by following the communication message printed on the sending and
journal reports (page 33).

COMMUNICATION ERROR
(CODE: 40-42, 46-72, FF)

A transmission or reception error occurred.
Try again or check with the other party.

COMMUNICATION ERROR
(CODE: 43, 44)

A line problem occurred. Connect the
telephone line cord to a different jack and try
again.

An overseas transmission error occurred. Try
using the overseas mode of feature #23
(page 65).

DOCUMENT JAMMED

The document is jammed. Remove the
jammed document (page 80).

ERROR-NOT YOUR UNIT
(CODE: 54, 59, 70)

A transmission or reception error occurred
because of a problem with the other party’s
fax machine. Check with the other party.

MEMORY FULL

The document was not received as a result of
the memory being full.

NO DOCUMENT

The document was not fed into the unit
properly. Reinsert the document and try
again.

OTHER FAX NOT RESPONDING

The other party’s fax machine is busy or has
run out of recording paper. Try again.

The document was not fed properly. Reinsert
the document and try again.

The other party’s fax machine rings too many
times. Send the fax manually (page 32).

The other party’s machine is not a facsimile.
Check with the other party.

The number you dialled is not in service.

PRESSED THE STOP KEY

{

STOP

}

was pressed and fax

communication was cancelled.

THE COVER WAS OPENED

The printer cover was opened. Close it and
try again.

Fax communication was successful.

Summary of Contents for KX-FLB753HK



























































































Search results

Summary of Contents for KX-FLB753HK

Reviews:

Related manuals for KX-FLB753HK

Brands by name

Popular brands

Panasonic KX-FLB753HK, Operating Instructions Manual

Search results

Summary of Contents for KX-FLB753HK

Reviews:

Related manuals for KX-FLB753HK

Brands by name

Popular brands