Automatic Dialling
- 23 -
Telephone
Storing names and telephone numbers into one-
touch dial
For rapid access to frequently dialled numbers, the unit provides 12 entries for one-touch dial.
L
Stations 1 to 3 can be used alternatively as broadcast keys (page 38).
1
Press
{
MENU
}
repeatedly until the
following is displayed.
DIRECTORY SET
PRESS STATION OR
b
DIRECTORY SET
PRESS NAVI.[
(
)
]
2
Select the desired station key.
For stations 1–3:
1.
Press one of the station keys.
Example:
STATION 1
DIAL MODE
[
±
]
2.
Press
{
SET
}
to go to the next prompt.
For stations 4–6:
Press one of the station keys.
For stations 7–12:
Press
{
LOWER
}
, then press one of the
station keys.
3
Enter the name, up to 10 characters (see
page 20 for instructions).
Example:
NAME=John
STORE:PRESS SET
4
Press
{
SET
}
.
Example:
<S01>=
5
Enter the telephone number, up to 30 digits,
using the dial keypad.
Example:
<S01>=1114497
L
If you want to enter a hyphen, press
{
FLASH
}
.
6
Press
{
SET
}
.
REGISTERED
u
DIRECTORY SET
PRESS STATION OR
b
DIRECTORY SET
PRESS NAVI.[
(
)
]
L
To program other entries, repeat steps 2
to 6.
7
Press
{
STOP
}
to exit the program.
Helpful hint:
L
You can confirm the stored entries on the
telephone number list (page 84).
Note:
L
A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
Press
{<}
or
{>}
to move the cursor to the
incorrect character/number, and then make the
correction.
To delete a character/number
Move the cursor to the character/number you
want to delete, and press
{
STOP
}
.
Station keys
(Delete)
(Hyphen)
{
MENU
}
{
FLASH
}
{>}
{<}
{
SET
}
{
STOP
}
{
LOWER
}
