Code
Function
Set Value
Effective
Range
Default
Remarks
630
Paper Jam Cause Distinction Code
0:No Paper Jam
1:The paper was pulled into the unit.
2:The paper was longer than the maximum length
of the register sensor.
3:The paper exit was not detected after the
registration.
4:The paper was longer than the maximum length
of the paper exit sensor.
5:The register sensor or paper exit sensor was
turned ON before the motor started to rotate.
6:The register sensor chattered.
7:The paper exit sensor chattered.
639
LSU test
See (P.65).
651
Write system program into the Flash Rom with a tool.
See the parts number of the tool. (P.241). The
tool includes the operating manual for writing
program.
655
Cause Distinction Code of Call Service 3
See (P.84).
677
Fan test
See (P.65).
710
Memory clear except History data
To reset the value to the default one, except
History data. Please restart a power supply after
clearing a memory.
717
Transmit speed selection
1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
1~6
1
Adjusts the speed to start training during FAX
transmission. Refer to (P.112) and
718
Receive speed selection
1:14400BPS
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
1~6
1
Adjusts the speed to start training during FAX
reception. Refer to (P.113) and
721
Pause tone detect
1:ON 2:OFF
1, 2
2
Selects the tone detection for pause in dialing.
722
Redial tone detect
1:ON 2:OFF
1, 2
1
Sets the tone detection mode after redialing.
763
CNG detect time for friendly
reception
1:10 sec
2:20 sec
3:30 sec
1~3
3
Selects the CNG detection tone of friendly
reception.
771
T1 timer
1:35 sec
2:60 sec
1, 2
1
Sets a higher value when the response from the
other party needs more time during FAX
transmission.
774
T4 timer
X 100 sec
00~99
00
Use this function when delay occurs in the line
and communication.
(ex. Mobile comm) does not work well.
815
Sensor & Vox check
See (P.65).
852
Print test pattern
See (P.65).
853
Top margin
1~5
3
----------
854
Left margin
1~7
4
----------
861
Paper size set
1:LETTER
2:A4
3:LEGAL
1~3
2
----------
874
DTMF ON time
X msec
060~200
90
----------
875
DTMF OFF time
X msec
060~200
90
----------
880
History list
See (P.74).
881
Journal 2 list
See (P.117).
882
Journal 3 list
See (P.117).
64
KX-FL513RU
Summary of Contents for KX-FL513RU
