Panasonic KX FL501 - B/W Laser - Fax Operating Instructions Manual Download Page 72

Page: 72 / 82

Jams

No feeding or multiple feeding occurs while sending

Shift the position of the green lever by using a
stick like instrument with a pointed end.

Left:

When documents do not feed.

Centre: Standard position (pre-selected)
Right: When documents multi–feed.

Green lever

Right

Left

If no feeding or multiple feeding occurs frequently, adjust the feeder pressure.

Document jams - sending

Push the front cover open button then open
the front cover.

Jammed document

Front cover

Middle
guide

Note:

●

Do not pull out the jammed document forcibly before
opening the front cover.

Pull down the middle guide while holding the
front cover.

Remove the jammed document carefully.

Lift the middle guide firmly.

Close the front cover, until locked, by
pushing down on both sides.

Front cover

Fuser unit

Front cover
open button

Caution:
The fuser unit gets hot.
Do not touch it.

Front cover

Summary of Contents for KX FL501 - B/W Laser - Fax



















































































Search results

Summary of Contents for KX FL501 - B/W Laser - Fax

Reviews:

Related manuals for KX FL501 - B/W Laser - Fax

Brands by name

Popular brands

Panasonic KX FL501 - B/W Laser - Fax, Operating Instructions Manual

Search results

Summary of Contents for KX FL501 - B/W Laser - Fax

Reviews:

Related manuals for KX FL501 - B/W Laser - Fax

Brands by name

Popular brands