Panasonic KX FL501 - B/W Laser - Fax Operating Instructions Manual Download Page 33

Page: 33 / 82

Sending Faxes

Sending a fax using ONE-TOUCH DIAL and
SPEED DIRECTOR

Adjust the width of the document guides to
the size of the document.

Insert the document (up to 15 pages) FACE
DOWN until the unit grabs the document and
a single beep is heard.

Display:

If necessary, press
repeatedly to select the desired setting
(p. 32).

Enter the fax number.
Using ONE-TOUCH DIAL 1–5:
Press the desired ONE-TOUCH DIAL key.

Using ONE-TOUCH DIAL 6–10:
Press

, then press the desired

ONE-TOUCH DIAL key.

Using

Display the desired name and press

FAX START

SPEED DIRECTOR

LOWER

RESOLUTION

STANDARD

Display

ONE-TOUCH DIAL

LOWER

FACE DOWN

Document guides

RESOLUTION

STOP

SPEED DIRECTOR

FAX START

Before using this feature, program the desired names and telephone numbers into ONE-TOUCH
DIAL and SPEED DIRECTOR (p. 22, 23).

If your unit does not send a fax

●

Confirm the stored telephone number on the
display and check that the number dialed is
answered by the other party’s machine (p. 26).

●

The connecting tone will be heard during dialing
to tell you the status of the other party’s machine
(feature #76 on page 58).

Fax auto redial

If the line is busy or if there is no answer, the unit
will automatically redial the number up to 2 times.

●

This feature is also available for delayed
transmission (feature #25 on page 55).

●

During redial, the following will be displayed.

Display:

●

To cancel redialing, press

STOP

WAITING REDIAL

Summary of Contents for KX FL501 - B/W Laser - Fax



















































































Search results

Summary of Contents for KX FL501 - B/W Laser - Fax

Reviews:

Related manuals for KX FL501 - B/W Laser - Fax

Brands by name

Popular brands

Panasonic KX FL501 - B/W Laser - Fax, Operating Instructions Manual

Search results

Summary of Contents for KX FL501 - B/W Laser - Fax

Reviews:

Related manuals for KX FL501 - B/W Laser - Fax

Brands by name

Popular brands