Panasonic KX-FL421 Operating Instructions Manual Download | Manualshive

Page: 4 / 72

background image

Important Information

4

For assistance, please visit http://www.panasonic.com/help

Operating safeguards

Make sure that the unit is installed in a well
ventilated room so as not to increase
density of ozone in the air. Since ozone is
heavier than air, it is recommended that air
at floor level be ventilated.

Unplug this unit from power outlets before
cleaning. Do not use liquid or aerosol
cleaners.

Do not cover slots and openings on the unit.
They are provided for ventilation and
protection against overheating. Never place
the unit near radiators, or in a place where
proper ventilation is not provided.

Never push any objects through slots in this
unit. This may result in the risk of fire or
electric shock. Never spill any liquid on the
unit.

To reduce the risk of electric shock, do not
disassemble this unit. Take the unit to an
authorized service center when service is
required. Opening or removing covers may
expose you to dangerous voltage or other
risks. Incorrect reassembly can cause
electric shock when the unit is subsequently
used.

Follow all warnings and instructions marked
on this unit.

Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may cause
a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.

Unplug this unit from power outlets and refer
servicing to an authorized service center
when any of the following conditions occur:

L

If the power cord is damaged or frayed.

L

If the unit has been exposed to rain or
water, or liquid has been spilled into the
unit. Do not use a microwave oven to
speed up the drying process of any
parts of the unit to avoid permanent
damage.

L

If the unit does not work normally by
following the operating instructions.
Adjust only controls covered by the
operating instructions. Improper
adjustment may require extensive work
by an authorized service center.

L

If the unit has been dropped or
physically damaged.

L

If the unit exhibits a distinct change in
performance.

FL421-PNQX3022ZA-OI-en.book Page 4 Thursday, July 29, 2010 9:35 AM

«
...
2
3
4
5
6
...
»

Summary of Contents for KX-FL421









































































Reviews:

No comments

Related manuals for KX-FL421

Solaris VISION BLSA3

Brand: Baby Lock Pages: 20

Brand: Happy Pages: 9

Brand: Tornado Pages: 11

Brand: Algam Lighting Pages: 16

Brand: ELNA Pages: 230

MEMORY CRAFT 4900 QC

Brand: Janome Pages: 182

Brand: Singer Pages: 33

Brand: Gamma Pages: 23

Brand: Janome Pages: 45

Brand: Duerkopp Adler Pages: 36

Brand: Saeco Pages: 36

SAECO D.A. 10P Instant

Brand: Saeco Pages: 84

Brand: Minuteman Pages: 12

Ambassador C46000-00

Brand: Minuteman Pages: 12

Brand: Minuteman Pages: 40

Brand: Frister Rossmann Pages: 22

Brand: Tema Telecomunicazioni Pages: 38

Brand: ZOJE Pages: 49

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands