Panasonic KX-FHD333BR, Service Manual

Page: 49 / 196

Code Function Set Value Effective
Range
Default Remarks
594 Overseas DIS detection select 1:detects at
the 1st time
2:detects at
the 2st time
1, 2 1 See Symptom/Countermeasure Table for long
distance and international calls in THE UNIT CAN
COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS (P.79).
Refer to SOMETIME THERE IS A TRANSMIT
PROBLEM (P.77) and THE UNIT CAN COPY,
BUT CANNOT EITHER TRANSMIT/RECEIVE
LONG DISTANCE OR INTERNATIONL
COMMUNICATIONS (P.79).
595 Receive error limit value set X Number of
times 001~999 100 Sets the number of acceptable error lines when
the FAX reconstructs the received data. Refer to
RECEIVE PROBLEM (P.78).
596 Transmit level set X dBm - 15~00 -07 Selects the FAX transmission level. Refer to
SOMETIME THERE IS A TRANSMIT PROBLEM
(P.77)and RECEIVE PROBLEM (P.78).
598 Receiving sensitivity 43= -43 dBm 20~48 40 Used when there is an error problem. Refer to
THE UNIT CAN COPY, BUT CANNOT EITHER
TRANSMIT/RECEIVE LONG DISTANCE OR
INTERNATIONL COMMUNICATIONS (P.79).
700 EXT.TAM OGM Rec. time X second 01~99 10 Sets the start time of silent detection.
701 No voice detect time X100 msec 01~99 50 Sets the silent call confirmation detection time.
717 Transmit speed selection 1:9600BPS
2:7200BPS
3:4800BPS
4:2400BPS 1~4 1 Adjusts the speed to start training during FAX
transmission. Refer to SOMETIME THERE IS A
TRANSMIT PROBLEM (P.77) and THE UNIT
CAN COPY, BUT THE TRANSMISSION AND
RECEPTION IMAGE ARE INCORRECT (P.82).
718 Receive speed selection 1:9600BPS
2:7200BPS
3:4800BPS
4:2400BPS 1~4 1 Adjusts the speed to start training during FAX
reception. Refer to RECEIVE PROBLEM (P.78)
and THE UNIT CAN COPY, BUT THE
TRANSMISSION AND RECEPTION IMAGE ARE
INCORRECT (P.82).
722 Redial tone detect 1:ON 2:OFF 1, 2 1 Sets the tone detection mode after redialing.
737 Junk correct call 1:ON 2:OFF 1, 2 2 This feature cannot be used for Extension
telephone. When a circuit is caught by Auswering
Machine, it cannot use.
745 Power ON film feed 1:ON 2:OFF 1, 2 1 When the power is turned on, the film is wound to
take up any slack.
763 CNG detect time for friendly
reception 1:10 sec
2:20 sec
3:30 sec 1~3 3 Selects the CNG detection tone of friendly
reception.
771 T1 timer 1:35 sec
2:60 sec 1, 2 1 Sets a higher value when the response from the
other party needs more time during FAX
transmission.
774 T4 timer X 100 msec 00~99 0 Use this function when delay occurs in the line
and communication (ex. Mobile comm) does not
work well.
815 Sensor & Vox check See TEST FUNCTIONS (P.50).
844 Original setting 1:NORMAL
2:LIGHT
3:DARKER 1~3 1 Use this feature when you need to transmit and
copy a document with very faint writing or very dark
writing.
NORMAL: Used for normal writing.
LIGHT: Used for faint writing.
DARKER: Used for dark writing.
852 Print test pattern See TEST FUNCTIONS (P.50).
853 Top margin 1~9 5 ----------
880 History list See HISTORY (P.58).
881 Journal 2 list See PRINTOUT EXAMPLE (P.95).
882 Journal 3 list See PRINTOUT EXAMPLE (P.95).
49
KX-FHD333BR