8. Programmable Features
54
8.2.2 Time settings
Alarm
An alarm will sound for 3 minutes at the set time once or
daily. Set the date and time beforehand (page 17).
1.
{j
/OK
}
i
“
Handset Setup
”
i
{
>
}
2. “
Time Settings
”
i
{
>
}
3. “
Alarm
”
i
{
>
}
2 times
4.
Select an alarm mode.
i
{
>
}
5.
Enter the desired hour and minute.
i
{j
/OK
}
6.
Select the desired ringtone.
i
{
>
}
7. “
Save
”
i
{
>
}
i
{ih}
Note:
L
To stop the alarm, press any dial key.
L
When in talk or intercom mode, the alarm will not
sound until the call has ended.
L
If you select
“
Once
”
, the setting will change to
“
Off
”
after the alarm sounds.
8.2.3 Display setup
Display language
1.
{j
/OK
}
i
“
Handset Setup
”
i
{
>
}
2. “
Display Setup
”
i
{
>
}
3. “
Select Language
”
i
{
>
}
4.
Select the desired language.
i
{
>
}
i
{ih}
Note:
L
If you select a language you cannot read, press
{ih}
, press
{j
/OK
}
, press
{^}
3 times, press
{
>
}
, press
{V}
2 times, press
{
>
}
, press
{V}
, press
{
>
}
, select the desired language, press
{
>
}
, then
press
{ih}
.
8.2.4 Call options
Setting call restriction
You can restrict selected cordless handsets/base unit
from dialling certain numbers. You can assign up to 6
phone numbers to be restricted, and select which
cordless handsets/base unit will be restricted. Storing
area codes here will prevent the restricted cordless
handsets/base unit from dialling any phone number in
that area code.
1.
{j
/OK
}
i
“
Base Unit Setup
”
i
{
>
}
2. “
Call Options
”
i
{
>
}
3. “
Call Restrict
”
i
{
>
}
4.
Enter
“
0000
”
(default base unit PIN).
L
If you forget your PIN, contact our service
personnel.
5. To restrict the base unit,
press
{
0
}
.
To restrict a cordless handset,
press the desired
cordless handset number.
L
All the registered cordless handset numbers will
be displayed.
L
Flashing numbers indicate call restriction is
turned ON for the corresponding cordless
handset/base unit.
L
To turn call restriction OFF for a cordless
handset/base unit, press the number again. The
number will stop flashing.
6.
{j
/OK
}
7.
Select a memory location.
i
{
>
}
8.
Enter the phone number or area code to be restricted
(up to 8 digits).
i
{j
/OK
}
i
{ih}
L
To erase a restricted number, press
{
C/
T
}
.
“
Off
”
Turns alarm OFF. Press
{
>
}
again,
then press
{ih}
to finish.
“
Once
”
The alarm sounds once at the set time.
Enter the desired day and month.
“
Daily
”
An alarm sounds daily at the set time.
FC228HK-PFQX2656ZA-en.book Page 54 Thursday, August 31, 2006 11:35 AM
Summary of Contents for KX-FC228HK
Page 78: ...78 Notes ...
Page 79: ...79 Notes ...
