8. Programmable Features
52
Code #06: Changing the ring setting in
TAD/FAX mode
TAD RING COUNT
RINGS=2
[
±
]
To change the number of rings before the unit
answers a call in TAD/FAX mode. You can select
“
2
” (default), “
3
”, “
4
”, “
5
”, “
6
”, “
7
”, “
8
”, “
9
”, “
TOLL
SAVER
” or “
RINGER OFF
”. See page 40 for
details.
L
Set feature #77 to “
TAD/FAX
” (page 55)
beforehand.
Code #06: Changing the ring setting in FAX
ONLY mode
FAX RING COUNT
RINGS=2
[
±
]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select “
2
” (default), “
3
”, “
4
”, “
5
”, “
6
”, “
7
”,
“
8
” or “
9
”.
L
Set feature #77 to “
FAX ONLY
” (page 55)
beforehand.
Code #10: Changing the maximum incoming
message recording time
RECORDING TIME
=VOX
[
±
]
“
VOX
” (default): Unlimited.
“
1-9 MIN
”: 1 minute to 9 minutes.
Code #11: Setting the remote operation ID
REMOTE TAD ID
=ON
[
±
]
1.
Press
{
MENU
}
.
2.
Press
{<}
or
{>}
repeatedly to select this
feature.
3.
Press
{A}
or
{B}
repeatedly to select “
ON
”.
4.
Press
{
SET
}
.
5.
Enter any 3-digit number except a number
using 0 or 7.
L
The default ID is “
222
”.
6.
Press
{
SET
}
.
7.
Press
{
MENU
}
.
Code #17: Setting the ringer pattern
RINGER PATTERN
=A
[
±
]
You can select “
A
” (default), “
B
” or “
C
”.
Code #19: Setting the clock entry/display
CLOCK DISPLAY
=12H
[
±
]
This feature changes the clock format for when
the line is indicated in printed reports and lists, or
displayed on the base unit.
“
12H
” (default): 12 hour clock
“
24H
”: 24 hour clock
8.3 Advanced features
Code #22: Setting the journal report to print
automatically
AUTO JOURNAL
=ON
[
±
]
“
ON
” (default): The unit will print a journal report
automatically after every 30 new fax
communications (page 36).
“
OFF
”: The unit will not print a journal report, but
will keep a record of the last 30 fax
communications.
Code #23: Sending documents overseas
OVERSEAS MODE
=OFF
[
±
]
If you have difficulty sending an overseas fax,
activate this feature before starting transmission.
L
This feature is not available for broadcast
transmission.
L
The calling charge may be higher as the
transmission speed is slowed down.
“
ON
”: After transmission, this feature will turn off
automatically.
“
OFF
” (default): Deactivates this feature.
Code #25: Sending a fax at a specific time
DELAYED SEND
=OFF
[
±
]
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
1.
Insert the document.
2.
Press
{
MENU
}
.
3.
Press
{#}
then
{
2
}{
5
}
.
4.
Press
{A}
or
{B}
repeatedly to select “
ON
”.
5.
Press
{
SET
}
.
6.
Enter the fax number.
7.
Press
{
SET
}
.
FC195AL.book Page 52 Tuesday, November 18, 2003 10:28 AM
