Panasonic KX-FC195AL Operating Instructions Manual Download Page 36

Page: 36 / 86

3. Telephone

3.10.2 Erasing caller information

Press

{e}

{v}

until the desired entry is

displayed.

Press

{>}

Press

{e}

{v}

repeatedly to select

“

CLEAR

”.

If you want to erase all caller information,
select “

ALL CLEAR

”.

Press

{>}

Press

{e}

{v}

repeatedly to select

“

YES

”.

Press

{>}

{j}

Press

{ih}

Note:

Telstra and Optus do not currently send caller
name information.

3.11 Storing caller
information into the
phonebook (Handset only)

Keep the front cover page open for button
locations.

Important:

This feature is not available in the
following cases.
–

The telephone number includes data
other than numbers (i.e.

or #).

–

The caller information does not
include a telephone number.

Press

{e}

{v}

repeatedly to display the

desired entry.

Press

{>}

Press

{e}

{v}

repeatedly to display

“

SAVE TEL NO

”.

Press

{>}

Press

{j}

Enter the name, up to 9 characters (see the
character table on page 29).

Press

{j}

Press

{ih}

Note:

Telstra and Optus do not currently send caller
name information.

FC195AL.book Page 34 Tuesday, November 18, 2003 10:28 AM

Summary of Contents for KX-FC195AL























































































Search results

Summary of Contents for KX-FC195AL

Reviews:

Related manuals for KX-FC195AL

Brands by name

Popular brands

Panasonic KX-FC195AL, Operating Instructions Manual

Search results

Summary of Contents for KX-FC195AL

Reviews:

Related manuals for KX-FC195AL

Brands by name

Popular brands