Problem
Cause/solution
The repeater’s STATUS
indicator and RSSI/ID indicator
flash green and red alternately
(alarm indication).
• The ID of the repeater is the same as the ID of
another repeater that is registered to the same
base unit.
Deregister both of the repeaters, then re-register
them near the base unit.
Deregister
1.
Unplug the AC adaptor, then press and hold
the PROGRAM button.
2.
While pressing and holding the PROGRAM
button, re-connect the AC adaptor.
3.
Keep pressing and holding the PROGRAM
button for about 10 seconds until the
STATUS indicator stops flashing and RSSI/ID
indicator turns red. Then release the
PROGRAM button.
• The STATUS indicator and the RSSI/ID indicator
turn amber for about 2 seconds and the STATUS
indicator flashes red again.
• If the STATUS indicator flashes green after
releasing the PROGRAM button, deregistration
failed. Deregister the repeater again.
Re-register
Unplug the AC adaptor, then perform from step 2
of “Installation/Registering the Repeater”.
The handset registered to the
repeater cannot make/receive a
call.
• When the STATUS indicator flashes green
rapidly, a handset registered to the repeater
cannot make/receive a call through the repeater.
Move closer to the base unit or wait until the
STATUS indicator flashes slowly or the STATUS
indicator is on.
3.5 Troubleshooting
24