3.5 Troubleshooting
Problem
Cause/solution
The repeater does not work.
• When the indicators do not turn on, the AC
adaptor is not connected properly. Check the
connections.
• When the indicators do not turn green, move the
repeater closer to the base unit.
• Registration may have been canceled.
Deregister the repeater, then re-register.
Deregister
1.
Unplug the AC adaptor, then press and hold
the PROGRAM button.
2.
While pressing and holding the PROGRAM
button, re-connect the AC adaptor.
3.
Keep pressing and holding the PROGRAM
button for about 10 seconds until the
STATUS indicator stops flashing and RSSI/ID
indicator turns red. Then release the
PROGRAM button.
• The STATUS indicator and the RSSI/ID indicator
turn amber for about 2 seconds and the STATUS
indicator flashes red again.
• If the STATUS indicator flashes green after
releasing the PROGRAM button, deregistration
failed. Deregister the repeater again.
Re-register
Unplug the AC adaptor, then perform from step 2
of “Installation/Registering the Repeater”.
While talking using the handset,
sound cuts in and out.
• The handset is out of range. Move the handset
closer to the repeater.
A repeating tone is heard while
talking using the handset.
or
The STATUS indicator is amber
and the RSSI/ID indicator
flashes green.
• The PROGRAM button was pressed. The
repeater is in programming mode. To exit, press
the PROGRAM button again. Do not press the
PROGRAM button, except when deregistering
the repeater.
3.5 Troubleshooting
23