Type of Flashing
Speed
Regular Flashing
640 ms On → 640 ms Off
Quick Flashing
320 ms On → 320 ms Off
1 Flash
Regular Flashing → 3 s Off
2 Flashes
Regular Flashing × 2 → 3 s Off
3 Flashes
Regular Flashing × 3 → 3 s Off
:
:
2.6 Repeater ID Confirmation
ID Confirmation Mode
The ID of currently registered repeaters can be checked as below:
Using the Repeater
1.
In Operation mode, press the PROGRAM button to switch to ID Confirmation mode.
The STATUS indicator will turn amber.
2.
The current ID is indicated by the number of times the RSSI/ID indicator flashes
green.
Note
If the repeater loses synchronization with the destination repeater in ID
Confirmation mode, the repeater will automatically reset. After synchronization is
established, the repeater will automatically enter ID Confirmation mode again.
3.
Return the repeater to Operation mode by pressing the PROGRAM button again.
ID Confirmation Mode (Remote)
Using the Handset (KX-TPA70/KX-TPA73) connected to the repeater.
1.
In Operation mode, move to the System Settings menu using the handset
(KX-TPA70/KX-TPA73) as below:
a.
/[CENTER]
b.
[ ]/[ ]: "System Settings" →
/[CENTER]
c.
[ ]/[ ]: "Base Unit Settings" →
/[CENTER]
d.
[ ]/[ ]: "Repeater" →
/[CENTER]
e.
[ ]/[ ]: "Flash LED" →
/[CENTER]
2.6 Repeater ID Confirmation
15
