Panasonic KW-WP1050E Operating Instructions Manual Download Page 218

Page: 218 / 240

Useful Information

218

Helpline Tel. No.: U.K. 0844 844 3898

Voicemail:

Settings:

Software update:

Display message

Cause/solution

Greeting message

playback failed.

There was a problem with data transmission.

Check the link status to the wireless LAN on the
handset, flash patterns of the WAN indicator on the
base unit, and so on. Then try again later.

Display message

Cause/solution

Invalid

The settings you entered are not correct.

Press

{

}

and enter correctly.

Handset could not

register.

Please try again.

Press

{

}

Press and hold the LOCATOR button

on the base unit for 4 seconds again until you see the
LOCATOR indicator on the base unit flashing in green.

Display message

Cause/solution

The battery level

is too low to

proceed with the

update process.

The battery level is too low to update software/firmware.

The battery level needs to be medium or full.

Recharge the battery and press

{

}

to proceed again.

The device must be

updated before it

can be used. This

requires a network

connection.

Continue?

Software/firmware may be defective and requires a
software/firmware update (page 121).

WP1050E.book Page 218 Thursday, March 29, 2007 11:31 AM

Summary of Contents for KW-WP1050E

















































































































































































































































Search results

Summary of Contents for KW-WP1050E

Reviews:

Related manuals for KW-WP1050E

Brands by name

Popular brands

Panasonic KW-WP1050E, Operating Instructions Manual

Search results

Summary of Contents for KW-WP1050E

Reviews:

Related manuals for KW-WP1050E

Brands by name

Popular brands