Base Unit Settings
174
Helpline Tel. No.: U.K. 0844 844 3898
3
Configure the settings, then click
[Save]
.
4
Click
[Restart]
.
L
The base unit automatically restarts and the Top Menu is displayed.
Setting
Description
[Security Mode]
L
Select the desired security mode.
L
No Encryption (Open), WEP, WPA-PSK and WPA2-PSK are
available for the wireless devices, including the handset.
Select the desired security mode for your wireless devices
connected to the base unit. Default is set to WEP.
WEP settings
[Network Key]
For WEP 64bit:
L
Enter the network key containing 5 alphanumeric characters
or 10 hexadecimal characters.
For WEP 128bit:
L
Enter the network key containing 13 alphanumeric
characters or 26 hexadecimal characters.
L
Press
[View]
to display the network key.
[Key Index]
L
Select
[Key 1]
,
[Key 2]
,
[Key 3]
or
[Key 4]
to be used if you
use WEP. The default is set to
[Key 1]
.
WPA-PSK/WPA2-PSK Settings
[Network Key]
L
Enter the network key (8 – 63 alphanumeric characters) in
this data field.
L
Press
[View]
to display the network key.
[Data Encryption]
L
Select the desired data encryption method.
For WPA-PSK
L
If your wireless devices use TKIP, select
[TKIP]
or
[TKIP+AES]
.
L
If your wireless devices use AES, select
[TKIP+AES]
.
For WPA2-PSK
L
If your wireless devices use TKIP, select
[TKIP+AES]
.
L
If your wireless devices use AES, select
[AES]
or
[TKIP+AES]
.
[Session-Key
renewal interval]
L
Set the interval for refreshing the encryption key between 30
and 604800 seconds. 604800 seconds is the equivalent of
one week. The default is set to 1800.
WP1050E.book Page 174 Thursday, March 29, 2007 11:31 AM
