8.1.1.7 Configure the settings when outputting to "Cloud"
To set the output destination to "Cloud", you need to set up the scan server. For details about how to
configure the scan server, refer to "9 Scan Server" (page 81).
8.1.1.8 Configure the settings when outputting to "SharePoint"
To set the output destination to "SharePoint", you need to set up the scan server. For details about how to
configure the scan server, refer to "9 Scan Server" (page 81).
8.1.1.9 Registering a preset
"Output to" and the scan settings can be registered as presets (Up to 100 items).
1.
Touch the desired output destination.
•
For details, refer to "8.1.2.1 Basic operation when setting "Output to" settings" (page 69).
2.
Touch the desired setting from the scan settings.
•
For details, refer to "8.1.2.2 Basic operations for specifying scan settings" (page 72).
3.
Touch the "
" button.
4.
Configure the scanning settings.
5.
Touch the icon (
) to complete your selection.
8.1.1.10 Registering a preset on the custom screen
Presets can be registered on the custom screen (up to 8 items).
1.
Launch Configuration Web.
•
For details, refer to "12.1 Launch Configuration Web" (page 93).
2.
Open the [Scan] tab.
3.
Click [Custom Screen].
4.
Set presets and icons in the list.
•
Enable (set to On) "Select Custom Icon" to use an icon created by the user. To register a custom icon,
refer to "8.1.1.11 Registering icons" (page 64).
5.
Click [Submit].
8.1.1 Preparation
63