8.1.1.11 Registering icons
You can register icons to display on the custom screen (up to 8 icons).
Prepare icons in advance with the following conditions.
•
120 x 120 pixels
•
24-bit color bitmap
1.
Launch Configuration Web.
•
For details, refer to "12.1 Launch Configuration Web" (page 93).
2.
Open the [Scan] tab.
3.
Click [Custom Icon].
4.
Click the icon (
) to add a new icon. Click the icon (
) to change the icon.
5.
Click [Browse] and specify the icon file by following the on-screen instructions.
6.
Click [Submit].
8.1.1.12 Register a Job Setting List
To perform push scan using jobs, configure the following settings.
1.
Start Image Capture Plus.
•
Select [Image Capture Plus Standard] as the application mode.
2.
On the [Scan Setting] menu, enable [Job Scan Mode].
•
You cannot enable [Job Scan Mode] if any documents are left in [Document List].
3.
On the [Scan Setting] menu, click [Job Setting List].
4.
Click [Add] button, and specify the settings.
•
The [Job Setting] dialog box is displayed.
5.
Click [Save Setting] to save the settings.
8.1.1 Preparation
64
