2. Setting Up Your Phone
24
Key Telephone User Guide
OR
• Enter the Speed Dial Set/Clear code (default =
710 (HK/UK)
or
710#
).
3.
Enter the PSD bin number (80-99).
4.
Enter the phone number you want to be speed-dialled (maximum length = 16
characters). Remember to include the Intercom Level or MCO Code level code
depending on how the system is set up. (Refer to the following table.)
Table 5. Characters allowed when assigning PSD numbers
5.
Press the HOLD key.
6.
Replace the handset or press the ON/OFF key.
Note:
When deleting a PSD number from a non-display phone, be sure to record the
change in your personalized list of PSD numbers. (See Appendix B, “Customized
PSD Bin Numbers.” on page 68.)
1.
Pick up the handset or press the ON/OFF key.
2.
Either:
• Press the PROG key and then press the MEMORY key.
OR
• Enter the Speed Dial Set/Clear code (default =
710 (HK/UK)
or
710#
).
3.
Enter the PSD bin number (80-99).
4.
Press the HOLD key.
To insert a . . .
Enter/Press...
Digit or character
0, 1-9, *, #
Intercom Level*
MEMORY * #
MCO Code**
MEMORY * 0
Pause
REDIAL
Hyphen (-) (Appears when the number is dialled or
checked, but not during programming.)
* Indicates that the digits that follow are either a feature access code or extension
number. (Do not include if system is set for Intercom Level.)
** Indicates that the digits that follow are for an outside number. (Do not include if
system is set for CO Level.)
To delete a PSD number assigned to a one-touch or soft key
