27
How to Care
Be sure to power off main unit before cleaning.
Main unit
■
When this product gets dirty, clean with a dry soft cloth.
When the dirt is hard to remove, wipe the product gently with a twisted wet cloth, and then
with a dry soft cloth.
■
Do not use materials such as thinner, benzene, wax, oil, soap foam, abrasive detergent, hot
water, and a chemical cloth.
Scanner
■
When a dust or sebum is staying on the surface of barcode scanner, scan is not performed
or scan height may be shorter.
When this product gets dirty, clean with a dry soft cloth.
When the dirt is hard to remove, wipe the product gently with twisted wet cloth, and then with
a dry soft cloth. (Approximately once a month is recommended.)
■
Wipe the barcode scanner vertically as shown in the illustration.
Optical communication interface connector
■
When a dust or sebum is staying on the connector, communication between this product and
cradle may be impossible. When this product gets dirty, clean with a dry soft cloth.
When the dirt is hard to remove, wipe the product gently with twisted wet cloth, and then with
a dry soft cloth. (Approximately once a month is recommended.)
Charging terminal
■
When a dust or sebum is staying on the terminal, charging may be impossible.
When this product gets dirty, clean with a dry soft cloth. When the dirt is hard to remove,
wipe the product gently with twisted wet cloth, and then with a dry soft cloth.
(Approximately once a month is recommended.)
Summary of Contents for JT-H300HT-E1
Page 40: ...P1209 2100 ...
