25
Scan a 2D code
■
How to use the 2D scanner
1
Press the side or center trigger. A laser marker
will be radiated.
Note:
• Depending on operations to be performed,
another key may be used to scan a code
instead of the trigger.
2
Move the unit so that the barcode (including
the 2D code) is located on the scanning area.
Note:
• Locate the unit so that the Laser goes
across the barcode.
Note:
• Please keep away a barcode or 2D code from the unit by 5cm or more.
• When the barcode scanner is located horizontally to the barcode, scan may not be
performed properly because of reflection. In this case, tilt the unit slightly.
3
After scan, the buzzer beeps and the indicator
lights red or green.
(The sound of the buzzer and colors of the
indicator depend on applications to be
performed)
Trigger
Scanning width
Aiming Line
Scanning Area
Center of
Scanning Area
S
ca
n
n
in
g
h
e
ig
h
t
Summary of Contents for JT-H300HT-E1
Page 40: ...P1209 2100 ...