5.1 Messages
WUME-SCLGCT-3
5-2
Various confirmation dialog boxes are displayed when the user is asked for confirmation dur
-
ing operation or the device enters in an inoperable state. If any message is displayed, carefully
read the following information and check an appropriate action method.
5.1 Messages
Message
Action method
IODD file is invalid
The IODD file that you attempted to import is invalid and so you can
-
not import it. Contact the organization from which you obtained the
IODD file.
The file can't be deleted because XXX is
using
The IODD file that you want to delete is currently in use, so it cannot
be deleted. Close the project first and then delete the file.
It failed to write the device's parameter.
An attempt to write the parameter to the IO-Link device has failed.
Check the connections.
If any error message is displayed, take action according to the mes-
sage.
Loading the setting file is failed
The file required to start
SC-LG-CEF Configuration Tool
was not
found. The tool will be started using the default settings.
The password you entered is incorrect
Enter the same password in both password fields.
The real device and configured device
are different
The IO-Link device set up with
SC-LG-CEF Configuration Tool
dif-
fers from the IO-Link device that is actually connected. Check the
tool settings or actual connections.
The data format is wrong.
The format of the entered data is incorrect. Enter data in the correct
format.
The real device and configured device
are different
The IO-Link device set up with
SC-LG-CEF Configuration Tool
dif-
fers from the IO-Link device that is actually connected. Check the
tool settings or actual connections.
It's a same port number.
For the paste target port, specify any port other than the copy source
port.
It failed to read the port configuration.
An attempt to read port settings from the IO-Link master has failed.
Check the connections.
The password you entered is incorrect.
Enter the correct password.
It failed to write the port configuration.
An attempt to write port settings to the IO-Link master has failed.
Check the connections.
Summary of Contents for IO-Link SC-LG-CEF
Page 2: ...WUME SCLGCT 3 2 MEMO ...
Page 6: ...WUME SCLGCT 3 6 MEMO ...
Page 12: ...WUME SCLGCT 3 1 6 MEMO ...
Page 44: ...WUME SCLGCT 3 4 8 MEMO ...
