15
Major operating controls
About the [INITIAL SET] button
After turning off the power of the camera, turn on the power of the camera while holding down this
button, and wait for around 5 seconds or more without releasing this button. Wait around 2 minutes
after releasing the button. The camera will start up and the settings including the network settings
will be initialized. Before initializing the settings, it is recommended to write down the settings in
advance.
12V IN
INITIAL
SET
ACT
LINK
POWER
10BASE-T/
100BASE-TX
WV-SP105
<Top view>
<Side view>
<Bottom view>
<Rear view>
Tripod screw hole
(This illustration represents WV-SP105.)
Tripod screw hole
Wire engaging hole
INITIAL SET button
Lens
Power indicator
Link indicator
(Lights when the connection
is being established)
Access indicator
(blinking at accessing)
Network connector
12 V DC
power cord terminals
