2.6 Utility
PC Programming Manual
87
2.6.14 Utility—CS Information
Displays information stored by the PBX regarding each Cell Station (CS).
This option is only available at Installer level, and requires that the target CSIF, DHLC or DLC card be
set to INS status.
The displayed items are as follows:
To view CS information
1.
From the
Utility
menu, select
CS Information
.
2.
From the
Target CSI/F Slot No
drop-down list, select the target slot.
•
To display information on a single card, select the slot number and name of that card.
•
To display information on all matching cards, select "ALL".
3.
From the
Interval Timer
drop-down list, select the number of seconds between each automatic
screen refresh.
4.
Click
Start
to begin monitoring.
Monitoring will be performed and the screen will refresh according to the interval specified.
To refresh the screen manually at any time, click
Refresh
.
5.
Click
Stop
to end monitoring.
6.
Select an option:
•
Click
Capture
if you want to save the displayed information.
1.
Enter a file name, or select a file to overwrite.
Item
Description
Shelf-Slot
Number of the slot (for KX-TDA600, shelf and slot)
Port
Number of the port
CS Name
Name of the attached CS
Status
Service status of the attached CS: INS, OUS, or FAULT.
If the status is FAULT, subsequent data items for that port will be left
blank.
Version
Version number of the program file stored in the CS
Revision
Revision number of the program file stored in the CS
CSID
12-digit ID number of the CS
Path
Number of the wireless extension currently using each path. In the
case of a group, several extensions may be using the same floating
extension number.
When an extension number is not registered, the display shows
"OFF". 2.4 GHz PSs can use up to 3 paths (KX-TDA100/KX-
TDA200/KX-TDA600) or 2 paths (KX-TDA30). DECT PSs can use
up to 4 paths (KX-TDA100/KX-TDA200/KX-TDA600) or 2 paths
(KX-TDA30). When using high-density CSs, DECT PSs can use up
to 8 paths.
Group Call
Number of PSs registered to the attached CS that are members of
a PS Ring Group.
Summary of Contents for HYBRID IP-PBX KX-TDA100
