Panasonic HYBRID IP-PBX KX-TDA100, Pc Programming Manual

Page: 364 / 854

2.9 [2] System
364 PC Programming Manual
Caller ID—Visual Caller ID Display
Specifies the length of time that a Caller ID number, with the Call Waiting tone offered by an analogue
line from the telephone company, is shown on the display. The Caller ID number flashes on the display
for five seconds, followed by a 10-second pause, then flashes again for five seconds.
Value Range
0–250 s
Maintenance Console Location
2.9.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Guide References
1.1.3.3 Call Waiting
1.8.4.2 Call Waiting Tone
1.18.1 Caller ID
Extension PIN—Lock Counter
Specifies the number of successive incorrect PIN entries allowed before the extension PIN is locked.
A locked extension PIN can not be used until reset from the extension assigned as manager.
(Specifying "None" disables this counter.)
Value Range
None, 1–15
Maintenance Console Location
2.9.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Guide References
1.9.5 Walking COS
1.9.6 Verification Code Entry
1.28.1 Extension Personal Identification Number (PIN)
External Sensor—Ring Duration
Specifies the length of time that the PBX waits for the called party to answer before cancelling a
sensor call.
Value Range
10 × n (n=1–15) s