23
(ENG) SQT0251
3
Hook the Head Mount to your ears
firmly so that the camera unit will be
positioned on the left side of your
face.
4
Adjust the size of the Head Mount,
and push down the lock lever to the
LOCK side.
≥
Adjust by slowly pulling the Head Mount (R)
sideways.
≥
If you adjust in such a way that the camera unit comes into close contact with the cheek, you can
record less blurry images.
5
Hold the camera holder, and adjust
the direction of the lens.
≥
To loosen the adjustment knob, rotate it
towards
1
. To tighten the adjustment knob,
rotate it towards
2
.
≥
If the direction of the lens cannot be changed,
loosen the adjustment knob slightly and tighten
it after adjusting the direction of the lens.
≥
If the camera unit is shaky, tighten the
adjustment knob.
∫
How to remove the camera
Hold the camera holder as shown in the figure, and remove the
camera unit in the direction of the arrow.
≥
Do not touch the lens or pull the camera/main unit connection cable while attaching or removing.
≥
When adjusting the size of the Head Mount and the tightness of the Headband, do so slowly
without applying too much force.
≥
If the adjustment knob comes off, attach it as indicated in the
right figure.
We recommend you make a test recording to check the settings such as the [ANGLE OF VIEW],
[LEVEL SHOT], [IMAGE STABILIZATION] and [WHITE BALANCE] before recording.
≥
Please refer to “Owner’s Manual (PDF format)“ for details.
Things to check after putting on this unit
D
Adjustment knob
E
Camera holder
HX-A500-SQT0251_mst.book 23 ページ ２０１４年４月１４日 月曜日 午後６時１５分
