40
Recording and Playback
:
ONE CLIP REC Function
This function compiles multiple recordings into a combined
clip and does not isolate single recordings (from REC
START to STOP) to single clips.
Use this function by opening the <REC FUNCTION>
screen from the SYSTEM SETTING page in the Menu and
setting the ONE CLIP REC MODE item to “ON”.
When the ONE CLIP REC mode is selected, “1-CLIP” will
display in the lower right of the viewfinder and the LCD
monitor.
Start the first recording by pressing the REC START/STOP
button on this unit, REC button on the handle, or the VTR
button on the lens. “START 1
¢
CLIP” will display.
Any subsequent recordings are automatically combined
into the clip. Up to a maximum of 99 clips can be combined
into a single clip.
Follow the instructions below to use a new and separate
clip and end combining to the clip.
z
Press and hold the STOP button for about 2 seconds
while recording is paused. (operating while recording is
on standby)
Or
z
Press and hold the REC START/STOP button, REC
button on the handle, or the VTR button on the lens for
about 2 seconds while recording to stop recording.
(operating while recording)
Follow the instructions above to end combining to the clip.
“END 1-CLIP” displays. Subsequent recordings use a new
and separate clip.
Notes
z
In addition to the aforementioned steps, the following
ends combining to the clip and subsequent recordings
use a new clip.
When the power is turned off
When the P2 card with the previous recording is
removed
When the P2 card is formatted or the clip is deleted
(when the previous combined clip does not exist)
z
The clip does not stop combining even when the STOP
button is pressed in the Menu or on the thumbnail
display.
Set the ONE CLIP REC MODE item to “OFF” in the Menu.
A text memo can be automatically added to the start of the
recording, the start of a section can be cued for playback,
and the thumbnail of the location can be checked before
each recording.
Automatically add a text memo to the start of the recording
by opening the <OPTION MODE> screen from the
SYSTEM SETTING page in the Menu and setting the
START TEXT MEMO item to “ON”.
Check and playback the location of the added text memo
by selecting THUMBNAIL
>
TEXT MEMO CLIPS from the
Thumbnail Menu and moving the cursor over the desired
clip.
Refer to [Playing back a clip at the position where a text
memo is recorded] (page 122) for details.
In addition, cue the location of the text memo for playback
by setting the SEEK SELECT item to “CLIP&T” in the
<OPTION MODE> screen. Press the FF or REW button
while playback is paused.
ONE CLIP REC Function
Recording a New Clip
* Up to a maximum of 99 recordings can be combined into a
single clip. When the 99th recording ends, recordings are no
longer automatically combined into the same clip.
Subsequent recordings are combined into a new clip.
First Recording
Second Recording
Nth Recording*
REC Start
REC stop
Single Combined Clip
REC Start
REC Start
REC stop
REC stop
Exiting ONE CLIP REC mode
Cueing to the Start of the Combined Section of
the Clip
AJ-HPX3000G(VQT1K82-5)E.book 40 ページ 2009年11月12日 木曜日 午後8時19分