![background image](http://html.mh-extra.com/html/panasonic/homehawk-kx-hnc800/homehawk-kx-hnc800_installation-manual_269889015.webp)
LED indicator
You can use the LED indicator to confirm the camera’s status.
Indicator
Status
Off
No power, or LED indicator is turned off
*1
Blue, lit
Normal operation, connected to wireless
router
*1
, privacy shutter is open
White, lit
Normal operation, connected to wireless
router
*1
, privacy shutter is closed
White, blinking quickly Camera is searching for wireless router
Green, lit
Initial setup required
Green, blinking slowly Initial setup is in progress with mobile device
connected
Green, blinking
Initial setup is starting
Red, lit
Motion detected
*1
, or camera is starting up
Red, blinking slowly
Live images are being viewed or recorded, or
camera is starting up
Red, blinking
Device malfunction
*1 You can configure the camera so that its LED indicator does not light
during normal operation or when motion is detected. For more
information, refer to the User’s Guide (page 31).
For assistance, please visit http://shop.panasonic.com/support
15
Setup
HNC800_(en_en)_0902_ver.220.pdf 15
2016/09/05 17:54:30