![background image](http://html.mh-extra.com/html/panasonic/homehawk-kx-hnc800/homehawk-kx-hnc800_installation-manual_269889020.webp)
of the camera, and then tap
[Next]
.
R
The LED indicator blinks in
green.
6
Change your mobile device’s
Wi-Fi setting temporarily so
that it connects to the camera
directly.
R
Open your mobile device’s
[Settings]
app, tap
[Wi-Fi]
,
select
“KX-HNC800_Panasonic”,
enter “00000000” as the
password, and then tap
[Join]
.
R
If more than 1 item named
“KX-HNC800_Panasonic” is
displayed, wait approx. 10
minutes and perform this
procedure from the
beginning.
7
Start the
[Home Network]
app again.
8
If necessary, enter the
password required to connect
to your wireless router and
then tap
[Next]
.
R
The camera and your
mobile device connect to
your wireless router.
R
If prompted, follow the
on-screen instructions and
connect your mobile device
to your wireless router, start
the app again, and then tap
[Add This Mobile Device]
.
R
If you enter the wrong
password, an error is
displayed. Repeat the initial
setup procedure from the
beginning.
9
When prompted, press the
M
SETUP
N
button on the back
of the camera.
R
The camera registers your
mobile device.
10
When prompted, set the
password that will be used to
access the camera.
11
When prompted, enter a
name for your mobile device
and then tap
[OK]
.
R
This setting allows you to
change the name assigned
to your device. It can help
you identify your mobile
device when performing
certain operations, such as
deregistering a mobile
device.
R
A list of all cameras
registered to the app is
displayed when initial setup
is complete.
20
For assistance, please visit http://shop.panasonic.com/support
Setup
HNC800_(en_en)_0902_ver.220.pdf 20
2016/09/05 17:54:31