Registering
additional mobile
devices to the
camera
After you set up the camera, you
can register additional mobile
devices. You can register up to 8
mobile devices to a camera. Each
mobile device can be registered to
up to 32 cameras.
Confirm the following before you
begin.
– Make sure you have completed
the initial setup procedure
– Make sure your mobile device
can connect to the Internet
– Make sure your wireless router
and the camera are turned on
– Make sure your mobile device
and the camera are connected
to the same wireless router
1
Using the mobile device that
you want to register,
download the
[HomeHawk]
app and then start the app.
R
If prompted, follow the
on-screen instructions and
select the appropriate
region/country.
2
Tap
[Indoor HD Camera]
.
3
Tap
[Add This Mobile
Device]
.
4
When prompted, press the
M
SETUP
N
button on the back
of the camera.
R
The camera registers your
mobile device.
5
When prompted, enter the
password required to access
the camera.
R
This password was set
during initial setup.
6
When prompted, enter a
name for your mobile device
and then tap
[OK]
.
R
This setting allows you to
change the name assigned
to your device. It can help
you identify your mobile
device when performing
certain operations, such as
deregistering a mobile
device.
R
A list of all cameras
registered to the app is
displayed when registration
is complete.
For assistance, please visit http://shop.panasonic.com/support
21
Setup
HN1003W_(en_en)_0302_ver001.pdf 21
2018/03/02 14:18:12
