password, and then tap
[Join]
.
R
If more than 1 item named
“KX-HNC800_Panasonic” is
displayed, wait approx. 10
minutes and perform this
procedure from the
beginning.
8
Start the
[HomeHawk]
app
again.
9
If necessary, enter the
password required to connect
to your wireless router and
then tap
[Next]
.
R
The camera and your
mobile device connect to
your wireless router.
R
If prompted, follow the
on-screen instructions and
connect your mobile device
to your wireless router, start
the app again, and then tap
[Add This Mobile Device]
.
R
If you enter the wrong
password, an error is
displayed. Repeat the initial
setup procedure from the
beginning.
10
When prompted, press the
M
SETUP
N
button on the back
of the camera.
R
The camera registers your
mobile device.
11
When prompted, set the
password that will be used to
access the camera.
12
When prompted, enter a
name for your mobile device
and then tap
[OK]
.
R
This setting allows you to
change the name assigned
to your device. It can help
you identify your mobile
device when performing
certain operations, such as
deregistering a mobile
device.
R
A list of all cameras
registered to the app is
displayed when initial setup
is complete.
For assistance, please visit http://shop.panasonic.com/support
19
Setup
HN1003W_(en_en)_0302_ver001.pdf 19
2018/03/02 14:18:12
