EN-18
Cleaning and Maintenance
Removing the Rack from Oven
Removing the rack will make it easier to clean the side
wall of the oven�
•
To remove the rack, unscrew 1 piece of screw at the
bottom side of wall using a ‘+’ screwdriver. (Figure 1)
•
Then, lift up the rack to an angle approximately 90 °,
and slowly pull the rack out from the oven. (Figure 2)
•
When cleaning is completed, reverse the above
procedures to return the rack to its original position.
90
Figure 1
Figure 2
Bulb Replacement
The bulb used in the oven lamp is a special bulb that
has high temperature resistance (120 V ~ 25 W)� So,
buying a genuine bulb from an authorized dealer is
necessary�
For replacement, proceed as follows:
1. Turn off the circuit breaker.
2. Unscrew the covering glass in counterclockwise
direction. (Figure 1)
3. Unscrew the bulb in counterclockwise direction and
replace the bulb with a new one of the same type.
(Figure 2)
4. Screw the covering glass in clockwise direction
after bulb replacement is completed.
Figure 1
Figure 2
