52
This appears when the position of the WHITE BAL switch has been
changed. “A,” “B” or “PRE” appears at #.
This appears when the AUTO KNEE switch has been set to ON or OFF.
This appears when the gain has been selected using the GAIN
selector switch or USER button.
This indicates the shutter speed value when the shutter speed has
been selected.
This appears when synchro scan has been selected as the shutter
speed.
This appears when the CC filter setting has been selected.
This appears when the ND filter setting has been selected.
This appears when the lens extender has been set to ON or OFF.
This appears when the iris overwrite correction value has been changed.
(Switch selection
displays)
WHITE: #
¢
.
¢
K
AUTO KNEE: ON/OFF
GAIN:
¢¢
dB
SS: 1/
¢¢¢¢
SS:
1
1/
¢¢¢¢
CC:
¢¢¢¢ ¢¢
K
ND:
¢
EXTENDER: ON/OFF
IRIS:
¢¢
F
¢ ¢
This appears when the brightness has dropped.
(LOW LIGHT
warning display)
LOW LIGHT
With the Y GET ON setting, the output brightness level near the
center marker is displayed as “%.”
(Y GET value)
¢¢¢
.
¢
%
This indicates the type of marker presently being displayed.
(MARKER display)
MKR: A/B/OFF
Chapter 4 Adjustments and settings for recording
(continued)
Display item
What is displayed
Status when display appears
This indicates the status of the front microphone’s power.
This indicates the menu setting status for the rear microphone’s
power.
(AUDIO: microphone
power status)
FRONT: ON/OFF
REAR: ON/OFF
This indicates the input signals and levels for the individual channels.
(AUDIO: channel
input signals and
levels)
FRONT/W.L./REAR
CH1/2/3/4
This appears during an AWB operation for channel A.
This appears during an AWB operation for channel B.
This appears when the AWB operation has been completed
satisfactorily for channel A.
This appears when the AWB operation has been completed
satisfactorily for channel B.
This appears when the AWB operation has been forcibly terminated.
This appears when the AWB operation has not been completed
satisfactorily. The status is indicated on the second line.
This warns the user that the color temperature is too low.
This warns the user that the color temperature is too high.
This warns the user that the brightness is too high.
This warns the user that the brightness is too low.
This warns the user that the processing could not be executed
within the operation time.
This appears when the AWB switch is set to PRE or when super gain
is set and AWB cannot be executed.
This warns the user to recheck the position of the filter selector control
during the AWB operation.
This appears during an ABB operation.
This appears when the ABB operation has been completed satisfactorily.
This appears when the ABB operation has been forcibly terminated.
This appears when the ABB operation has not been completed
satisfactorily.
This appears when the BLACK SHADING operation is ready to be
performed as a result of holding down the ABB switch for a length of
time during an ABB operation.
This appears during a BLACK SHADING operation.
This appears when the BLACK SHADING operation has been
completed satisfactorily.
This appears when the BLACK SHADING operation has been forcibly
terminated.
This appears when the BLACK SHADING operation has been not
completed satisfactorily.
:
Camera warning
and message
display area
(Displays related to
the AWB, ABB and
switch operations)
AWB A ACTIVE
AWB B ACTIVE
AWB A OK
¢
.
¢
K
AWB B OK
¢
.
¢
K
AWB BREAK
¢
.
¢
K
AWB NG
COLOR TEMP LOW
COLOR TEMP HIGH
LEVEL OVER
LOW LIGHT
TIME OVER
AWB PRESET
¢
.
¢
K
CHECK FILTER
ABB ACTIVE
ABB OK
ABB BREAK
ABB NG
B-SHD READY
B-SHD ACTIVE
B-SHD OK
B-SHD BREAK
B-SHD NG
01.AJ-HDX900̲P̲E(VQT0X86-1)̲E 06.10.19 3:34 PM ページ52
Downloaded From CamcorderManual.com Panasonic Manuals
