![background image](http://html1.mh-extra.com/html/panasonic/hdx900/hdx900_operating-instructions-manual_3854016020.webp)
20
CTL
RF SERVO HUMID SLACK
h
TAPE
E
B
Y
minM
s
frm
13
24
0
D
VTCG TIME DATE P-iREC
SLAVE HOLD
GPS
BATT
E
F
OVER
OVER
10
OO
40
-dB
30
20
NDF
Mode displays
GPS:
Lights when signals cannot be received during GPS operation.
GPS
:
Lights when signals are being received during GPS operation.
P-REC:
Lights in pre-recording mode and flashes during the time set for
pre-recording after the tally lamp for recording has turned off.
iREC:
Lights during recording when the interval recording mode is
established; flashes during recording standby.
i:
Flashes when the interval recording mode has been selected.
Displays relating to the time code
NDF:
Lights when the time code is in the non-drop frame mode.
DF:
Lights when the time code is in the drop frame mode.
SLAVE:
Lights when the time code is locked externally.
HOLD:
Lights when the time generator/reader value is being held.
CTL:
Lights when CTL is selected by the DISPLAY switch and the
CTL count value is displayed.
TCG:
Lights when TC (or UB) is selected by the DISPLAY switch
and the TC (or UB) generator value is displayed.
TC:
Lights when TC (or UB) is selected by the DISPLAY switch
and the TC (or UB) reader value is displayed.
VTCG:
Lights when UB is selected by the DISPLAY switch and the
VIUB generator value is displayed.
VTC:
Lights when UB is selected by the DISPLAY switch and the
VIUB reader value is displayed.
TIME:
Lights when UB is selected by the DISPLAY switch and the
values of the hour, minutes and seconds in real time are
displayed.
DATE:
Lights when UB is selected by the DISPLAY switch and the
values of the year, month and day are displayed in real time.
No display:
Remains off when UB is selected by the DISPLAY switch and
the real-time values of the hour and minutes in the time zone
are displayed.
Time counter display:
The time code, CTL, user bits and real time are displayed.
<Note>
When UB has been selected by the DISPLAY switch, each time the HOLD
button is pressed, the setting is switched in the following sequence: VTCG
(VTC)
5
DATE
5
TIME
5
no display (time zone)
5
TCG (TC) and so on
repeatedly.
Time code-related switch settings and display
items
TCG switch position
DISPLAY switch
position
Display item
SET
TC or CTL
Time code
F-RUN or R-RUN
UB
User bits
CTL
CTL
TC
Time code
UB
User bits
Chapter 2 Parts and their functions
(continued)
01.AJ-HDX900̲P̲E(VQT0X86-1)̲E 06.10.19 3:34 PM ページ20
Downloaded From CamcorderManual.com Panasonic Manuals