61
VQT3U98
Adjusting the audio input level
∫
Adjusting the input level of the built-in microphone (5.1 ch)
≥
Set the [MIC SETUP] to anything other than [2ch]. (
l
57)
1
Select the menu.
2
(When [SET]/[SET
r
] is selected)
Touch
/
to adjust the microphone
input level.
≥
Touch
to activate/disactivate ALC. When ALC is
activated, the icon is surrounded by yellow and the
amount of sound distortion can be reduced. When
ALC is disactivated, natural recording can be
performed.
≥
Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the
sound is distorted.) Select a lower setting for
microphone input level.
3
Touch [ENTER] to set the microphone
input level and then touch [EXIT].
≥
is displayed on the recording screen when the ALC is turned on.
≥
When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom
rate.
≥
You cannot record with the audio completely muted.
: [RECORD SETUP]
#
[5.1ch MIC LEVEL]
#
desired setting
[AUTO]:
ALC is activated, and the recording level is adjusted
automatically.
[SET]/[SET
r
]:
The desired recording level can be set.
MENU
A
Center
B
Front left
C
Back left
D
Front right
E
Back right
F
Microphone input level
HDC-Z10000P-VQT3U98_mst.book 61 ページ ２０１１年１０月１７日 月曜日 午後２時２４分
