51
VQT3U98
Perform focus adjustments using the focus ring. If auto focusing is difficult due to the
conditions, then use Manual Focus.
≥
Switch to Manual Mode. (
l
46)
1
Press the FOCUS A/M/
¶
button to switch to Manual Focus.
≥
It will switch to MF from AF.
2
Adjust the focus by rotating the focus ring.
≥
The focus value can be set from MF00 (focus distance: approximately 30 cm (0.98 feet) (in
3D Recording Mode) and approximately 3.5 cm (1.4
q
) (in 2D Recording Mode)) to MF99
(focus distance: infinity). The larger the focus value gets, the further the position where
focus is achieved.
≥
It is set to MF95 and the focus will move to infinite when the FOCUS A/M/
¶
button is
pressed and held.
≥
To return to Auto Focus, either press the FOCUS A/M/
¶
button or set to Intelligent Auto
Mode by switching the iA/MANU switch.
≥
When the distance to the subject approaches within 1 m (3.3 feet) approx., the camera
switches to the macro range and
or
. (The camera may switch to the macro range
even when the distance to the subject is 1 m (3.3 feet) or more depending on the subject.)
≥
Depending on the zoom magnification, this unit may fail to switch to the macro range, or go
to a non-displayed focus value.
≥
When you perform a zoom operation in the macro range, this unit may go out of focus.
≥
When you change the [3D/2D REC MODE] setting, this unit will go into Auto Focus Mode.
Utilizing the USER button
It is convenient to use following functions of the USER button when it is set to Manual Focus.
≥
Please refer to page 67 for details about setting the USER button.
Recording
Focus
USER button function
Effect
Push AF (
l
69)
It can be temporary changed to Auto Focus when it is
set to Manual Focus.
Focus Assist (
l
71)
The in-focus area is displayed in red.
FOCUS A/M
/∞
A
FOCUS A/M/
¶
button
B
Focus ring
HDC-Z10000P-VQT3U98_mst.book 51 ページ ２０１１年１０月１７日 月曜日 午後２時２４分
