background image

117

VQT3J26

To disconnect USB cable safely

Select the 

 icon in task tray displayed on the PC, and then click [Eject Panasonic 

Camcorder].

Depending on your PC’s settings, this icon may not be displayed.

Charging the battery by connecting it to different devices

When using the battery, if you turn off the unit and connect it to a PC, Panasonic Blu-ray disc 
recorder or Panasonic DVD recorder, the battery will charge.

When connecting this unit to a PC for the first time, make sure to connect this unit to 
the PC with this unit turned on.

Insert the USB cable securely all the way. It will not operate properly if it is not inserted all 
the way.

Do not use any other USB cables except the supplied one. (Operation is not guaranteed 
with any other USB cables.)

Be sure to connect the unit directly to the PC, Blu-ray disc recorder or DVD recorder.

During charging, the status indicator flashes.

You cannot charge when the status indicator flashes rapidly, or when it does not light at all. 
Charge using the AC adaptor. (

l

15)

It will take 2 or 3 times longer to charge compared to when using the AC adaptor.

If the status indicator flashes at a particularly fast or slow rate, refer to page 134.

About the screen indication of the unit

Do not disconnect the USB cable, the battery or the AC adaptor while the access lamp 
is on or card access icon (

) appears on the unit screen.

Do not disconnect the USB cable, the battery or the AC adaptor while the access lamp 
is on or built-in memory access icon (

) appears on the unit screen.

Do not disconnect the USB cable, the battery or the AC adaptor while the HDD access 
lamp is on or HDD access icon (

) appears on the unit screen.

If the screen does not change when the unit is operated while connected to a PC, 
disconnect the battery and/or AC adaptor, wait approximately 1 minute, reconnect the 
battery and/or AC adaptor, wait approximately 1 minute again, and then turn the unit 
back on. (Data may be destroyed when above operation is performed while accessing 
the SD card, built-in memory or HDD.) 

HDCSD80&TM80&HS80EB-VQT3J26_mst.book  117 ページ  2011年1月11日 火曜日 午前11時44分

Summary of Contents for HDC-TM80





















































































































































Reviews: