111
VQT1J42
With other products
7
Select the paper size setting on
[PAPER SIZE].
[STANDARD]: Size specific to the printer
[4
t
5 INCH]:
L size
[5
t
7 INCH]:
2L size
[4
t
6 INCH]:
Postcard size
[A4]:
A4 size
≥
You cannot set paper sizes not supported on
the printer.
8
Select the layout setting on
[PAGE LAYOUT].
[STANDARD]: Layout specific to the printer
[
]:
No frame print
[
]:
Frame print
≥
You cannot set page layouts not supported on
the printer.
9
Select [PRINT]
#
[YES] and press
the cursor button to print the
pictures.
≥
Exit PictBridge by disconnecting the USB cable
(supplied) after the pictures have been printed.
When you stop printing halfway
Move the cursor button down.
≥
A confirmation message appears. If [YES] is
selected, the number of prints set is canceled
and the screen returns to step 3. If [NO] is
selected, all the settings are kept and the
screen returns to step 4.
≥
Avoid the following operations during printing.
These operations disable proper printing.
j
Disconnecting the USB cable
j
Opening the card slot cover and removing
the SD card
j
Switching the mode dial
j
Turning off the power
≥
Check the settings for the paper size, quality of
print, etc. on the printer.
≥
The edges of still pictures recorded in this unit
with a 16:9 aspect ratio may be cut off. When
using a printer with a trimming or borderless
printing function, cancel this function before
printing. (Refer to the operating instructions of
the printer for details.)
≥
You may not be able to print still pictures
recorded with other products.
≥
When the unit is connected directly to the
printer, the DPOF settings cannot be used.
≥
Connect the printer directly to this unit. Do not
use a USB hub.
VQT1J42ENG.book 111 ページ ２００７年７月２０日 金曜日 午前１０時３６分
