56
VQT3B52
≥
Use of a tripod is recommended for recording with a stable picture.
≥
The reception range for the remote control might become narrow at the upper side of the
unit, so operate from the lower side. (
≥
You will hear a sound when the unit is moved rapidly with the 3D Conversion Lens
attached, but this is not a malfunction.
≥
When the adjustment dial is rotated too much, you will hear a “clapping” sound and the
adjustment screen will stop moving. In such a case, rotate the adjustment dial in the
opposite direction until the adjustment screen starts moving.
≥
[ECONOMY] will not work while you adjust the 3D Conversion Lens attachment position.
≥
When the 3D Conversion Lens is attached, the auto slow shutter setting is [AUTO SLOW
SHTR (3D)]. The default setting of [AUTO SLOW SHTR (3D)] is [ON].(
≥
While 3D recording if moving the unit fast, the message is more likely to appear.
∫
Removing the 3D Conversion Lens
Rotate the attachment screw to UNLOCK to loosen
and then remove.
≥
Place the unit on a stable location such as a table,
and be careful not to drop the 3D Conversion
Lens.
≥
Be careful not to lose the lens caps.
≥
When storing, always fit the lens caps to avoid scratching the protective glass.
UNLOCK
UNLOCK
