53
VQT3B52
3
Tighten the attachment screw of the
3D Conversion Lens by rotating to
LOCK.
≥
Be careful not to overtighten. If the 3D
Conversion Lens is overtightened, it may not be
possible to remove it from the unit.
≥
Attach the 3D Conversion Lens securely so it will
not tilt or move.
∫
Recording 3D video
When using for the first time, be sure to adjust the 3D Conversion Lens attachment position.
≥
Turn off the unit.
≥
Change the mode to
.
1
Attach the 3D Conversion Lens to the unit. (
2
Turn on the unit.
≥
Turn on with the unit in a horizontal state.
≥
The 3D Conversion Lens adjustment mode screen will appear automatically after
performing the initial setting.
≥
If the 3D Conversion Lens adjustment mode screen does not appear automatically,
set from the menu.
([SETUP]
#
[3D CONV. LENS SETUP])
≥
If the unit is turned on with the USB cable still connected, the USB connection will take
priority.
3
Attach the lens front cap to the 3D
Conversion Lens.
≥
2 screens will appear.
≥
The horizontal line for adjustment on the lens
front cap is displayed on the screen.
A
Guide Line
4
Touch [ADJUST].
≥
If the black vertical line and the black horizontal line are within the red guidelines
A
and
adjustment is not required, touch [EXIT] and proceed to step 11.
≥
Perform the adjustment in a bright location where the horizontal line for adjustment will be
clearly visible.
≥
The 3D Conversion Lens cannot be adjusted using the viewfinder.
LOCK
LOCK
