Panasonic HDC-SDT750 Operating Instructions Manual Download

Page: 124 / 163

124

VQT3B52

Images played back on this unit can be dubbed onto a DVD recorder or video device.

≥

Images are dubbed in standard quality.

≥

Use the AC adaptor to free you from worrying about the battery running down.

Connect this unit to a video device and then change the mode to

Start playback on this unit.

Start recording on the connected device.

≥

To stop recording (dubbing), stop playback on this unit after stopping recording on the
recorder.

Dubbing in standard picture quality

Change the video input on the video
device and TV that this unit is
connected to.

≥

The channel set will differ depending on the
terminal to which the unit is connected.

≥

See the operating instructions of the video
device for details.

≥

Insert the plugs as far as they will go.

≥

Do not use any other AV multi cables except
the supplied one.

AV multi cable (supplied)

Summary of Contents for HDC-SDT750




































































































































































Search results

Summary of Contents for HDC-SDT750

Reviews:

Related manuals for HDC-SDT750

Brands by name

Popular brands

Panasonic HDC-SDT750, Operating Instructions Manual

Search results

Summary of Contents for HDC-SDT750

Reviews:

Related manuals for HDC-SDT750

Brands by name

Popular brands