Panasonic HDC-SDT750, Operating Instructions Manual

Page: 43 / 163

43
VQT3B52
The amount of space left on the SD card can be checked.
(Only when the mode is at the
position)
≥
Touch [EXIT] or press the MENU button to close the indication.
≥ The SD card requires some space to store information and manage system files, so the
actual usable space is slightly less than the indicated value. The usable space is generally
calculated as 1 GB=1,000,000,000 bytes. The capacities of this unit, PCs and software are
expressed as 1 GB=1,024
k
1,024
k
1,024=1,073,741,824 bytes. Therefore, the indicated
value of the capacity appears to be smaller.
≥ Check the remaining recordable time for motion pictures in motion picture recording mode.
(
l 27)
The amount of space left on the SD card or the built-in memory can be checked.
(Only when the mode is at the
position)
≥ Touching [CHANGE MEDIA] switches the unit between the display for the SD card and the
display for the built-in memory.
≥ Touch [EXIT] or press the MENU button to close the indication.
≥
The SD card or built-in memory requires some space to store information and manage system
files, so the actual usable space is slightly less than the indicated value. The usable SD card/
built-in memory space is generally calculated as 1 GB=1,000,000,000 bytes. The capacities of
this unit, PCs and software are expressed as 1 GB=1,024
k
1,024
k
1,024=1,073,741,824 bytes.
Therefore, the indicated value of the capacity appears to be smaller.
≥ Check the remaining recordable time for motion pictures in motion picture recording mode.
(
l 27)
Perform the touch screen calibration if a different object to the one touched is selected.
1 Touch [CALIBRATION].
≥
Touch [ENTER].
2 Touch the [
_
] that appears on the screen with the supplied stylus pen.
≥
Touch [
_
] in sequence (up left # down left # down right # up right # centre).
3 Touch [ENTER].
≥ Calibration cannot be performed when the LCD monitor is turned 180 o .
[CARD STATUS]
[MEDIA STATUS]
[CALIBRATION]