43
VQT3K35
The unit is put into recording pause approx. 1 second when the unit is turned on with the
mode set to
or
.
≥
Depending on the recording conditions, start time may be longer than 1 second.
≥
In the Quick power on mode, the zoom magnification becomes 1
k
.
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥
When in Quick start standby mode about 80% of the power used in Recording pause
mode is being consumed, so the recording time will be reduced.
≥
Quick start will not work if there is no SD card inserted.
≥
Change the mode to
or
.
1
Set [
QUICK START
] to [
ON
].
2
Close the LCD monitor while the mode is set to
or
.
The status indicator
A
flashes green and the unit goes into
Quick start standby mode.
≥
The lens cover does not close.
3
Open the LCD monitor.
The status indicator
A
lights red and the unit is put into
recording pause.
≥
Quick Start Standby Mode is canceled if
j
about 5 minutes have elapsed
j
mode is set to
≥
Depending on the recording conditions and menu settings, time for Quick start may be
longer than 0.6 seconds.
≥
It may take some time for Automatic white balance to adjust.
≥
In the Quick Start Mode, the zoom magnification becomes 1
k
.
≥
If [ECONOMY] (
l
42) is set to [5 MINUTES] and the unit automatically goes into Quick
Start Standby Mode, close the LCD monitor and then open it again.
≥
Turn the unit off using the power button.
≥
Quick start standby mode cannot be released by the remote control.
Please refer to page 47.
[QUICK POWER ON]
[OFF]/[ON]
[QUICK START]
[OFF]/[ON]
[REMOTE CONTROL]
[OFF]/[ON]
HDCSD800P-VQT3K35_mst.book 43 ページ ２０１０年１２月２０日 月曜日 午前９時４分
