62
VQT2B44
Function
Effect/Setting method
Relay recording
It is possible to continuously record motion picture to an SD
card when there is no space available in the built-in memory.
≥
Change the mode to
.
Select the menu. (
l
29)
[RECORD SETUP]
#
[RELAY REC]
#
[ON]
≥
is displayed on the screen.
will disappear when space
in the built-in memory is gone and the recording to the SD card
starts.
≥
It allows to record only to SD card from built-in memory.
≥
Relay recording can only be performed once.
≥
Combine the scenes that were relay recorded using the
[RELAY SCENE COMBINE] into the SD card. (
l
92)
≥
Once the relay recorded scene and the scene that was recorded
on the SD card after that are combined into the SD card using the
[RELAY SCENE COMBINE], it will be possible to perform the
relay recording again.
≥
If the [RELAY REC] is set to [ON] without performing the [RELAY
SCENE COMBINE], a message is displayed. You will be able to
perform relay recording by touching [YES], but you will not be able
to perform the [RELAY SCENE COMBINE] after that.
Anti-Ground-
Shooting (AGS)
If the unit continues to be tilted upside down from the normal
horizontal position while recording motion pictures, it is
automatically put into recording pause.
≥
Change the mode to
.
Select the menu. (
l
29)
[RECORD SETUP]
#
[AGS]
#
[ON]
Auto slow shutter
You can record bright pictures even in dark places by slowing
the shutter speed.
≥
Change the mode to
.
≥
The intelligent auto mode is set to off. (
l
42)
Select the menu. (
l
29)
[RECORD SETUP]
#
[AUTO SLOW SHTR]
#
[ON]
≥
The shutter speed is set to 1/25 or more depending on the
surrounding brightness.
HDCSD20&TM20&HS25EB-VQT2B44_mst.book 62 ページ ２００９年１月５日 月曜日 午後２時４４分
