74
VQT3K69
Message is displayed when this unit is moved rapidly.
When “CAMERA PANNING IS TOO FAST.” appears, move the unit slowly while recording.
≥
Set to [OFF] to turn off the message indication.
≥
Message will not appear while pausing the recording. (Message will appear even if it is
pausing the recording if [DEMO MODE] is set to [ON].)
This will reduce the wind noise coming into the built-in microphones while maintaining the
realism.
≥
Switch to Manual Mode. (
l
82)
≥
This function’s default setting is [ON].
≥
When switching to Intelligent Auto Mode, [WIND NOISE CANCELER] is set to [ON], and the
setting cannot be changed.
≥
You may not see the full effect depending on the recording conditions.
≥
If wind sound cannot be reduced with the Wind noise canceler function alone, set [BASS
SETTING] to [LOWCUT]. (
l
76)
Recording setting of the built-in microphone can be adjusted.
≥
Switch to Manual Mode. (
l
82)
[SHOOTING GUIDE]
: [RECORD SETUP]
#
[SHOOTING GUIDE]
#
[ON]
[WIND NOISE CANCELER]
: [RECORD SETUP]
#
[WIND NOISE CANCELER]
#
[ON]
[MIC SETUP]
: [RECORD SETUP]
#
[MIC SETUP]
#
desired setting
[SURROUND]:
Sound is recorded with 5.1 ch surround microphone.
[ZOOM MIC]:
Directivity of the microphone is synchronized with the zoom
operation. Sounds near the front of the unit are recorded more
clearly if you zoom in (close-up) and surrounding sounds are
recorded more realistically if you zoom out (wide angle).
[FOCUS MIC]:
Directivity of the center is enhanced for recording audio near the
front of the unit more clearly.
[STEREO MIC]:
Sound from two directions is recorded in 2 ch by forward-facing
stereo microphones.
MENU
MENU
MENU
HDCTM900&HS900P&PC-VQT3K69_mst.book 74 ページ ２０１０年１２月１６日 木曜日 午後７時８分
